HomeMy WebLinkAboutMICR Toner Source Technologies (not updated as of 6.9.15)Material Safety Data Sheet
Conforms to ANSI Z400.5-2004 Standard (United States, Canada, Mexico).
Supplier/Manufacturer: Source Technologies, LLC2910 Whitehall Park Dr
Charlotte, NC 28273
Product and company identification1 .
Description :Part number :
5K MICR Toner Cartridge12K MICR Toner Cartridge8K MICR Toner Cartridge17K MICR Toner Cartridge
40K Imaging Unit70K Imaging Unit
5K LAP MICR Toner Cartridge12K LAP MICR Toner Cartridge8K LAP MICR Toner Cartridge
17K LAP MICR Toner Cartridge40K LAP Imaging Unit
70K LAP Imaging Unit
STI-204514-24B6224
STI-204514H-24B6226
STI-204065-24B6228STI-204065H-24B6230
STI-24B6237STI-24B6238
STI-204514-LAP-24B6233STI-204514H-LAP-24B6234
STI-204065-LAP-24B6235
STI-204065-LAP-24B6236STI-LAP-24B6241
STI-LAP-24B6242
Composition/information on ingredients2 .
Name % CAS number OSHA PEL ACGIH TLV
Polyester resin 70 - 85 Trade secret. None None
Iron oxides 10 - 30 1317-61-9
12227-89-3
None None
Wax 1 - 5 NJTSRN
80100451-5016
None None
Charge Control Agent 0.5-1.5 Trade secret.
NJTSRN
80100451-5037
None None
Amorphous Silica 0.5-1.5 Trade secret.
NJTSRN
80100451-501
None None
aluminium hydroxide 0.1-1 21645-51-2 OSHA PEL 1989 (United States,
3/1989). Notes: as Al
TWA: 2 mg/m³, (as Al) 8 hours.
None
titanium dioxide 0.1-1 13463-67-7 OSHA PEL (United States,
6/2010).
TWA: 15 mg/m³ 8 hours. Form:
Total dust
OSHA PEL 1989 (United States,
3/1989).
TWA: 10 mg/m³ 8 hours. Form:
Total dust
ACGIH TLV (United States,
3/2012).
TWA: 10 mg/m³ 8 hours.
Hazards identification
Eye contact
Skin contact
Inhalation
Ingestion
:
:
:
:
3 .
Hazard information :Primary Routes of Exposure: Dust inhalation, skin contact.
Low acute inhalation toxicity. As with exposure to high concentrations of any dust,
minimal irritation of the respiratory tract may occur. Exposure not probable with intended
use. Chronic: No adverse changes in the lungs result from this accumulation. Exposure
not probable with intended use.
Not an irritant. Low dermal toxicity. Not a dermal sensitizer.
Toner may act as a mechanical irritant.
Low acute oral toxicity. Exposure not probable with intended use.
Date of issue:Page: 1/53/01/2013
1.800.922.8501
For actual printer/cartridge compatibility
please reference: www.sourcetech.com
Do not induce vomiting. Never give anything by mouth to an unconscious person. Get
medical attention if symptoms appear.
Wash with soap and water. Should irritation occur, seek medical attention.
Do not rub eyes. Flush immediately with plenty of water. Remove contact lenses and
continue flushing for at least 15 minutes. If irritation develops and persists, seek medical
attention.
First aid measures4 .
Aggravated conditions :
Eye contact
If symptoms, such as shortness of breath or persistent coughing are experienced,
remove source of contamination and move individual to fresh air. If symptoms persist,
seek medical attention.
Skin contact
Inhalation
Ingestion
Notes to physician
:
:
:
:
:No specific antidote.
Exposure to high airborne dust concentrations, including toner, may aggravate existing
respiratory conditions.
Fire-fighting measures
Hazardous combustion
products
Extinguishing media
NFPA Rating
HMIS Classification
Special protective
equipment for fire-fighters
:
:
:
5 .
Special exposure hazards :
:
Flash point :
Auto-ignition temperature :
Flammable limits :
:
Solid, not applicable.
Not applicable.
Not determined.
Carbon dioxide, water spray or fog, dry chemical or foam.
Carbon monoxide, carbon dioxide, unidentified organics.
Like many finely divided materials, toner dust, in high concentrations can form an
explosive mixture in air which, if ignited, could result in a dust explosion.
Fire fighters should wear full protective clothing, including self-contained breathing
apparatus.
Health: 1 Flammability: 1 Reactivity: 0
Health: 1* Flammability: 1 Reactivity: 0
Environmental precautions
Accidental release measures
:
Personal precautions :
Methods for cleaning up :
6 .
None required for intended use in printer.
Disposal is subject to national, state, regional, or provincial regulations.
If a dust cloud is possible due to a spill, remove all sources of ignition such as open
sparks, flames, or static discharge to prevent the ignition of the dust. Minimize dust
generation during clean up. Sweep up spill with non-metallic broom and dustpan.
Contain for disposal. Oil permeated sweeping compound may be useful in cleaning up
spills.
Handling and storage
Handling
Storage
:
:
7 .
Avoid generating dust. To avoid damage to cartridge and accidental contact with toner,
keep out of reach of children.
Store in a cool, dry place. Store away from oxidizing material.
Exposure controls/personal protection8 .
Engineering measures :
None required for intended use in printer.
None required for intended use in printer.
None required for intended use in printer.Eyes
:
Skin protection
Respiratory
:
:
:
Gloves
None required for intended use in printer.
Not required. Use in a well-ventilated area.
Date of issue:Page: 2/53/01/2013
Solid (Finely divided solid.)
Not determined.
Not determined.
Not applicable.
Faint odor (Plastic.)
Black.
Melting/freezing point
Not applicable.
Physical and chemical properties
Physical state
Specific gravity
Vapor density
Evaporation rate
Odor
Color
Not determined.Volatility
:
:
:
:
:
:
:
:
9 .
Insoluble in the following materials: cold water and hot water.Solubility :
The product is stable.
Strong oxidizing materials.
Will not occur.
Stability and reactivity
Stability and reactivity
Conditions to avoid
Materials to avoid
Hazardous decomposition
products
Hazardous polymerization
:
:
:
:
:
10 .
None known.Additional guidelines :
Keep away from heat, flame, sparks and other ignition sources.
Carbon monoxide, carbon dioxide, unidentified organics.
Toxicological information11 .
Primary routes of exposure
Aggravating conditions
Exposure limit values
:
:
:
Acute toxicity oral rat LD50
(mg/kg)
:
Inhalation :
Ingestion :
Potential chronic health
effects
:CARCINOGENIC EFFECTS:Classified 2B (Possible for humans.) by IARC [Titanium
Dioxide].
MUTAGENIC EFFECTS: Toner is negative (nonmutagenic) in the Ames assay.
TERATOGENIC EFFECTS: Not available.
Inhalation of dust, skin contact.
Exposure to high airborne dust concentrations, including toner, may aggravate existing
respiratory conditions.
Toner dust is a particulate not otherwise classified (PNOC) or regulated (PNOR).
Low acute oral toxicity. Exposure not probable with intended use.
Low acute inhalation toxicity. As with exposure to high concentrations of any dust,
minimal irritation of the respiratory tract may occur. Pure titanium dioxide, a minor
component of this product, has been listed by IARC as a group 2B (possible carcinogen).
This classification is based on rat "lung particulate overload" studies performed with
airborne particulate. Toner is not listed by IARC, NTP, or OSHA.
Product/ingredient referenced in
section 1 Rat >5000 mg/l LC50 Inhalation Vapor 4 hours
Rat >5000 mg/kg LD50 Oral -
ResultSpecies Dose
Date of issue:Page: 3/53/01/2013
Not determined.
Products of degradation: carbon oxides (CO, CO₂) and water. Some metallic oxides.
Ecological information
Persistence/degradability
Not determined.Mobility
Other information
:
:
:
Bioaccumulative potential :Not determined.
12 .
Waste disposal
Disposal considerations
:
13 .
This product is not a listed hazardous waste in accordance with Federal Regulation 40
CFR Part 261. If discarded in its purchased form, this product would not be a
hazardous waste either by listing or by characteristic. However, under RCRA, it is the
responsibility of the product user to determine at the time of disposal whether a
material has been contaminated and should be classified as a hazardous waste.
Disposal is subject to local, state and federal regulations.
Transport information14 .
This product is not regulated for carriage according to ADR/RID, IMDG, ICAO/IATA.DOT/TDG.
Regulatory information
Canada
United States
15 .
TSCA (USA)All ingredients are listed on the Toxic Substances Control Act (TSCA) inventory, have
been registered, or are exempt.
:
WHMIS (Canada)Not controlled under WHMIS (Canada).:
SARA / EPCRA (USA) :None of the ingredients in this product has a final reportable quantity (RQ) under
Emergency Planning and Community Right-to Know Act (EPCRA)- Section 302:
Extremely Hazardous Substances (EHS) or notification requirements for EHS under
Section 304.
California Prop. 65 :This product contains no known materials at levels which the State of California has
found to cause cancer, birth defects or other reproductive harm - California Proposition
65.
EINECS (Europe):All ingredients are listed on the European Inventory of Existing Commercial Substances
(EINECS) list, have been registered on the European List of New Chemical Substances
(ELINCS), or are exempt.
ENCS (Japan):All ingredients are listed on the Japanese Existing and New Chemical Substances
(ENCS) list, have been registered, or are exempt.
AICS (Australia):All ingredients are listed in Australian Inventory of Chemical Substances (AICS), have
been registered, or are exempt.
International regulations lists
DSL/NDSL :All ingredients are listed on the Canadian Domestic Substances List (DSL), have been
registered on the Non-Domestic Substances List (NDSL), or are exempt.
Mexico Classification Health: 1 Flammability: 1 Reactivity: 0:
Philippines inventory
(PICCS)
:All ingredients are listed on the Philippines Inventory (PICCS) or are exempt.
Korea inventory (KECI) :All ingredients are listed on the Korean Existing Chemicals List (ECL), have been
registered, or are exempt.
China inventory (IECSC) :All ingredients are listed on the Chinese inventory (IECSC) or are exempt.
REACH Status :EU (REACH): All components of the toner formulation are registered, pre-registered or
exempt under REACH. Pre-registered chemicals will be registered between 2011 and
2018.
Date of issue:Page: 4/53/01/2013
Other information16 .
Date of issue
Version :
:
ANSI Z400.1, MSDS Standard, 2004. - Manufacturer's Material Safety Data Sheet. -
29CFR Part1910.1200 OSHA MSDS Requirements. - 49CFR Table List of Hazardous
Materials, UN#, Proper Shipping Names, PG. - Canada Gazette Part II, Vol. 122, No. 2.
Registration SOR/88-64, 31 December 1987. Hazardous Products Act "Ingredient
Disclosure List" - Canadian Transport of Dangerous Goods, Regulations and Schedules,
Clear Language version 2005. - Official Mexican Standards NOM-018-STPS-2000 and
NOM-004-SCT2-1994.
Notice to reader
To the best of our knowledge, the information contained herein is accurate. However, neither the above named supplier nor
any of its subsidiaries assumes any liability whatsoever for the accuracy or completeness of the information contained herein.
Final determination of suitability of any material is the sole responsibility of the user. All materials may present unknown
hazards and should be used with caution. Although certain hazards are described herein, we cannot guarantee that these
are the only hazards that exist.
References :
Revision comments :No significant revisions to health and safety information.
3/01/2013.
1
Date of issue:Page: 5/53/01/2013