Loading...
HomeMy WebLinkAboutTriple-S-Graffit-Remover-WipesSAFETY DATA SHEET 1. Identification 1000037230Product number 21101 GRAFFITI REMOVER WIPESProduct identifier Triple S 2 Executive Park Dr Billerica, MA 01862 United States Company information 1-800-323-2251Company phone 01Version # cleanerRecommended use None known.Recommended restrictions 2. Hazard(s) identification Not classified.Physical hazards Category 4Acute toxicity, inhalationHealth hazards Category 1Serious eye damage/eye irritation Category 3 respiratory tract irritationSpecific target organ toxicity, single exposure Not classified.OSHA defined hazards Label elements Signal word Danger Hazard statement Causes serious eye damage. Harmful if inhaled. May cause respiratory irritation. Precautionary statement Prevention Avoid breathing mist or vapor. Use only outdoors or in a well-ventilated area. Wear eye protection/face protection. Response If inhaled: Remove person to fresh air and keep comfortable for breathing. If in eyes: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a poison center/doctor. Storage Store in a well-ventilated place. Keep container tightly closed. Store locked up. Disposal Dispose of contents/container in accordance with local/regional/national/international regulations. Hazard(s) not otherwise classified (HNOC) None known. Supplemental information None. 3. Composition/information on ingredients Mixtures CAS number %Common name and synonymsChemical name Other components below reportable levels 60 - 80 97-64-3 20 - 40Ethyl lactate *Designates that a specific chemical identity and/or percentage of composition has been withheld as a trade secret. 4. First-aid measures Remove victim to fresh air and keep at rest in a position comfortable for breathing. Oxygen or artificial respiration if needed. Call a POISON CENTER or doctor/physician if you feel unwell. Inhalation Wash off with soap and water. Get medical attention if irritation develops and persists.Skin contact Immediately flush eyes with plenty of water for at least 15 minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Get medical attention immediately. Eye contact 1 / 6 Product name: 21101 GRAFFITI REMOVER WIPES Product #: 1000037230 Version #: 01 Issue date: 03-27-2018 SDS US Rinse mouth. Get medical attention if symptoms occur.Ingestion Severe eye irritation. Symptoms may include stinging, tearing, redness, swelling, and blurred vision. Permanent eye damage including blindness could result. May cause respiratory irritation. Most important symptoms/effects, acute and delayed Provide general supportive measures and treat symptomatically. Keep victim warm. Keep victim under observation. Symptoms may be delayed. Indication of immediate medical attention and special treatment needed If you feel unwell, seek medical advice (show the label where possible). Ensure that medical personnel are aware of the material(s) involved, and take precautions to protect themselves. General information 5. Fire-fighting measures Water fog. Foam. Dry chemical powder. Carbon dioxide (CO2).Suitable extinguishing media Do not use water jet as an extinguisher, as this will spread the fire.Unsuitable extinguishing media During fire, gases hazardous to health may be formed.Specific hazards arising from the chemical Self-contained breathing apparatus and full protective clothing must be worn in case of fire.Special protective equipment and precautions for firefighters Move containers from fire area if you can do so without risk.Fire fighting equipment/instructions Use standard firefighting procedures and consider the hazards of other involved materials.Specific methods No unusual fire or explosion hazards noted.General fire hazards 6. Accidental release measures Keep unnecessary personnel away. Keep people away from and upwind of spill/leak. Wear appropriate protective equipment and clothing during clean-up. Avoid inhalation of vapors and spray mists. Do not touch damaged containers or spilled material unless wearing appropriate protective clothing. Ensure adequate ventilation. Local authorities should be advised if significant spillages cannot be contained. For personal protection, see section 8 of the SDS. Personal precautions, protective equipment and emergency procedures Large Spills: Stop the flow of material, if this is without risk. Dike the spilled material, where this is possible. Cover with plastic sheet to prevent spreading. Absorb in vermiculite, dry sand or earth and place into containers. Following product recovery, flush area with water. Small Spills: Wipe up with absorbent material (e.g. cloth, fleece). Clean surface thoroughly to remove residual contamination. Never return spills to original containers for re-use. For waste disposal, see section 13 of the SDS. Methods and materials for containment and cleaning up Avoid discharge into drains, water courses or onto the ground.Environmental precautions 7. Handling and storage Do not get this material in contact with eyes. Avoid inhalation of vapors and spray mists. Use only outdoors or in a well-ventilated area. Wear appropriate personal protective equipment. Observe good industrial hygiene practices. Precautions for safe handling Store locked up. Store in original tightly closed container. Store in a well-ventilated place. Store away from incompatible materials (see Section 10 of the SDS). Conditions for safe storage, including any incompatibilities 8. Exposure controls/personal protection No exposure limits noted for ingredient(s).Occupational exposure limits No biological exposure limits noted for the ingredient(s).Biological limit values Good general ventilation (typically 10 air changes per hour) should be used. Ventilation rates should be matched to conditions. If applicable, use process enclosures, local exhaust ventilation, or other engineering controls to maintain airborne levels below recommended exposure limits. If exposure limits have not been established, maintain airborne levels to an acceptable level. Provide eyewash station. Appropriate engineering controls Individual protection measures, such as personal protective equipment Chemical respirator with organic vapor cartridge and full facepiece.Eye/face protection Skin protection Wear appropriate chemical resistant gloves. Suitable gloves can be recommended by the glove supplier. Hand protection Wear suitable protective clothing.Other 2 / 6 Product name: 21101 GRAFFITI REMOVER WIPES Product #: 1000037230 Version #: 01 Issue date: 03-27-2018 SDS US Chemical respirator with organic vapor cartridge and full facepiece.Respiratory protection Wear appropriate thermal protective clothing, when necessary.Thermal hazards Always observe good personal hygiene measures, such as washing after handling the material and before eating, drinking, and/or smoking. Routinely wash work clothing and protective equipment to remove contaminants. General hygiene considerations 9. Physical and chemical properties Appearance Liquid.Physical state Premoistened towelForm Not available.Color Not available.Odor Odor threshold Not available. pH Not available. Melting point/freezing point Not available. Initial boiling point and boiling range 337.62 °F (169.79 °C) estimated Flash point 163.0 °F (72.8 °C) Closed Cup SUPPLIER estimated Evaporation rate Not available. Not applicable.Flammability (solid, gas) Upper/lower flammability or explosive limits Flammability limit - lower (%) Not available. Flammability limit - upper (%) Not available. Explosive limit - lower (%)Not available. Explosive limit - upper (%)Not available. Vapor pressure 2.23 psig @70F estimated Vapor density Not available. Relative density Not available. Solubility(ies) Solubility (water)Not available. Partition coefficient (n-octanol/water) Not available. Auto-ignition temperature Not available. Decomposition temperature Not available. Viscosity Not available. Other information Not explosive.Explosive properties Not oxidizing.Oxidizing properties Specific gravity 1.03 SUPPLIER estimated 10. Stability and reactivity The product is stable and non-reactive under normal conditions of use, storage and transport.Reactivity Material is stable under normal conditions.Chemical stability Hazardous polymerization does not occur.Possibility of hazardous reactions Avoid temperatures exceeding the flash point. Contact with incompatible materials.Conditions to avoid Strong oxidizing agents.Incompatible materials No hazardous decomposition products are known.Hazardous decomposition products 3 / 6 Product name: 21101 GRAFFITI REMOVER WIPES Product #: 1000037230 Version #: 01 Issue date: 03-27-2018 SDS US 11. Toxicological information Information on likely routes of exposure Inhalation Harmful if inhaled. Skin contact No adverse effects due to skin contact are expected. Eye contact Causes serious eye damage. Ingestion Expected to be a low ingestion hazard. Symptoms related to the physical, chemical and toxicological characteristics Severe eye irritation. Symptoms may include stinging, tearing, redness, swelling, and blurred vision. Permanent eye damage including blindness could result. May cause respiratory irritation. Information on toxicological effects Acute toxicity Harmful if inhaled. May cause respiratory irritation. Prolonged skin contact may cause temporary irritation.Skin corrosion/irritation Causes serious eye damage.Serious eye damage/eye irritation Respiratory or skin sensitization Respiratory sensitization Not a respiratory sensitizer. This product is not expected to cause skin sensitization.Skin sensitization No data available to indicate product or any components present at greater than 0.1% are mutagenic or genotoxic. Germ cell mutagenicity Carcinogenicity This product is not considered to be a carcinogen by IARC, ACGIH, NTP, or OSHA. IARC Monographs. Overall Evaluation of Carcinogenicity Not listed. OSHA Specifically Regulated Substances (29 CFR 1910.1001-1050) Not regulated. US. National Toxicology Program (NTP) Report on Carcinogens Not listed. This product is not expected to cause reproductive or developmental effects.Reproductive toxicity Specific target organ toxicity - single exposure May cause respiratory irritation. Specific target organ toxicity - repeated exposure Not classified. Aspiration hazard Not an aspiration hazard. 12. Ecological information The product is not classified as environmentally hazardous. However, this does not exclude the possibility that large or frequent spills can have a harmful or damaging effect on the environment. Ecotoxicity Components Test ResultsSpecies Ethyl lactate (CAS 97-64-3) Aquatic EC50Crustacea 560 - 763 mg/l, 48 hoursWater flea (Daphnia magna) * Estimates for product may be based on additional component data not shown. LC50Fish 305 - 417 mg/l, 96 hoursZebra danio (Danio rerio) No data is available on the degradability of this product. Persistence and degradability Bioaccumulative potential No data available.Mobility in soil Other adverse effects No other adverse environmental effects (e.g. ozone depletion, photochemical ozone creation potential, endocrine disruption, global warming potential) are expected from this component. 13. Disposal considerations Collect and reclaim or dispose in sealed containers at licensed waste disposal site. Dispose of contents/container in accordance with local/regional/national/international regulations. Disposal instructions Dispose in accordance with all applicable regulations.Local disposal regulations 4 / 6 Product name: 21101 GRAFFITI REMOVER WIPES Product #: 1000037230 Version #: 01 Issue date: 03-27-2018 SDS US The waste code should be assigned in discussion between the user, the producer and the waste disposal company. Hazardous waste code Dispose of in accordance with local regulations. Empty containers or liners may retain some product residues. This material and its container must be disposed of in a safe manner (see: Disposal instructions). Waste from residues / unused products Since emptied containers may retain product residue, follow label warnings even after container is emptied. Empty containers should be taken to an approved waste handling site for recycling or disposal. Contaminated packaging 14. Transport information DOT Not regulated as dangerous goods. IATA Not regulated as dangerous goods. IMDG Not regulated as dangerous goods. Not established.Transport in bulk according to Annex II of MARPOL 73/78 and the IBC Code 15. Regulatory information This product is a "Hazardous Chemical" as defined by the OSHA Hazard Communication Standard, 29 CFR 1910.1200. US federal regulations TSCA Section 12(b) Export Notification (40 CFR 707, Subpt. D) Not regulated. CERCLA Hazardous Substance List (40 CFR 302.4) Not listed. SARA 304 Emergency release notification Not regulated. OSHA Specifically Regulated Substances (29 CFR 1910.1001-1050) Not regulated. Superfund Amendments and Reauthorization Act of 1986 (SARA) Immediate Hazard - Yes Delayed Hazard - No Fire Hazard - No Pressure Hazard - No Reactivity Hazard - No Hazard categories SARA 302 Extremely hazardous substance Not listed. NoSARA 311/312 Hazardous chemical SARA 313 (TRI reporting) Not regulated. Other federal regulations Clean Air Act (CAA) Section 112 Hazardous Air Pollutants (HAPs) List Not regulated. Clean Air Act (CAA) Section 112(r) Accidental Release Prevention (40 CFR 68.130) Not regulated. Not regulated.Safe Drinking Water Act (SDWA) US state regulations US. California Controlled Substances. CA Department of Justice (California Health and Safety Code Section 11100) Not listed. US. Massachusetts RTK - Substance List Ethyl lactate (CAS 97-64-3) US. New Jersey Worker and Community Right-to-Know Act Ethyl lactate (CAS 97-64-3) 5 / 6 Product name: 21101 GRAFFITI REMOVER WIPES Product #: 1000037230 Version #: 01 Issue date: 03-27-2018 SDS US US. Pennsylvania Worker and Community Right-to-Know Law Ethyl lactate (CAS 97-64-3) US. Rhode Island RTK Not regulated. US. California Proposition 65 California Safe Drinking Water and Toxic Enforcement Act of 1986 (Proposition 65): This material is not known to contain any chemicals currently listed as carcinogens or reproductive toxins. International Inventories Country(s) or region Inventory name On inventory (yes/no)* YesAustralia Australian Inventory of Chemical Substances (AICS) YesCanada Domestic Substances List (DSL) NoCanada Non-Domestic Substances List (NDSL) YesChina Inventory of Existing Chemical Substances in China (IECSC) YesEurope European Inventory of Existing Commercial Chemical Substances (EINECS) NoEurope European List of Notified Chemical Substances (ELINCS) NoJapan Inventory of Existing and New Chemical Substances (ENCS) YesKorea Existing Chemicals List (ECL) YesNew Zealand New Zealand Inventory NoPhilippines Philippine Inventory of Chemicals and Chemical Substances (PICCS) YesUnited States & Puerto Rico Toxic Substances Control Act (TSCA) Inventory *A "Yes" indicates that all components of this product comply with the inventory requirements administered by the governing country(s) A "No" indicates that one or more components of the product are not listed or exempt from listing on the inventory administered by the governing country(s). 16. Other information, including date of preparation or last revision 03-27-2018Issue date Version #01 The information provided in this Safety Data Sheet is correct to the best of our knowledge, information and belief at the date of its publication. The information given is designed only as a guidance for safe handling, use, processing, storage, transportation, disposal and release and is not to be considered a warranty or quality specification. The information relates only to the specific material designated and may not be valid for such material used in combination with any other materials or in any process, unless specified in the text. Disclaimer Product and Company Identification: Alternate Trade NamesRevision information 6 / 6 Product name: 21101 GRAFFITI REMOVER WIPES Product #: 1000037230 Version #: 01 Issue date: 03-27-2018 SDS US