HomeMy WebLinkAboutCRC-2-26-Multi-Purpose-Precision-Lubricant
Material Safety Data SheetMaterial Safety Data SheetMaterial Safety Data SheetMaterial Safety Data Sheet
Page 1 of 7
Section 1: Product & Company Identification
Product Name: 2-26® Multi-Purpose Precision Lubricant (aerosol)
Product Number (s): 02004, 02005, 02024, 72005
Product Use: Multi-Purpose Lubricant
Manufacturer / Supplier Contact Information:
In United States: In Canada: In Mexico:
CRC Industries, Inc. CRC Canada Co. CRC Industries Mexico
885 Louis Drive 2-1246 Lorimar Drive Av. Benito Juárez 4055 G
Warminster, PA 18974 Mississauga, Ontario L5S 1R2 Colonia Orquídea
www.crcindustries.com www.crc-canada.ca San Luís Potosí, SLP CP 78394
1-215-674-4300 (General) 1-905-670-2291 www.crc-mexico.com
(800) 521-3168 (Technical) 52-444-824-1666
(800) 272-4620 (Customer Service)
24-Hr Emergency – CHEMTREC: (800) 424-9300 or (703) 527-3887
Section 2: Hazards Identification
Emergency Overview
DANGER: Flammable. Harmful or Fatal if Swallowed. Contents Under Pressure.
As defined by OSHA’s Hazard Communication Standard, this product is hazardous.
Appearance & Odor: Amber liquid, pleasant odor
Potential Health Effects:
ACUTE EFFECTS:
EYE: Slightly irritating but does not injure eye tissue.
SKIN: Frequent or prolonged contact may irritate and cause dermatitis. Low order of toxicity.
INHALATION: High vapor concentrations (attainable at elevated temperatures well above ambient) are irritating
to the eyes and the respiratory tract, and may cause headaches, dizziness, anesthesia,
drowsiness, unconsciousness, and other central nervous system effects.
INGESTION: Small amounts of this product aspirated into the respiratory system during ingestion or vomiting
may cause mild to severe pulmonary injury, possibly progressing to death.
CHRONIC EFFECTS: None known
TARGET ORGANS: None known
Medical Conditions Aggravated by Exposure: pre-existing dermatitis
See Section 11 for toxicology and carcinogenicity information on product ingredients.
Product Name: 2-26® Multi-Purpose Precision Lubricant (aerosol)
Product Number (s): 02004, 02005, 02024, 72005
Page 2 of 7
Section 3: Composition/Information on Ingredients
COMPONENT CAS NUMBER % by Wt.
Isoparaffinic hydrocarbon 64742-47-8 65 – 75
White mineral oil 8042-47-5 15 – 25
Inhibitor blend proprietary 5 – 15
Carbon dioxide 124-38-9 1 – 5
Section 4: First Aid Measures
Eye Contact: Immediately flush with plenty of water for 15 minutes. Call a physician if irritation persists.
Skin Contact: Remove contaminated clothing and wash affected area with soap and water. Call a physician if
irritation persists. Wash contaminated clothing prior to re-use.
Inhalation: Remove person to fresh air. Keep person calm. If not breathing, give artificial respiration. If
breathing is difficult give oxygen. Call a physician.
Ingestion: If swallowed, do NOT induce vomiting. Keep at rest. Get prompt medical attention.
Note to Physicians: This product may pose as an aspiration hazard.
Section 5: Fire-Fighting Measures
Flammable Properties: This product is flammable in accordance with aerosol flammability definitions.
(See 16 CFR 1500.3(c)(6) ).
Flash Point: 195°F (TCC) Upper Explosive Limit: 4.9
Autoignition Temperature: 482°F Lower Explosive Limit: 0.5
Fire and Explosion Data:
Suitable Extinguishing Media: Foam, dry chemical, or water spray
Products of Combustion: Oxides of carbon
Explosion Hazards: Aerosol containers, when exposed to heat from fire, may build pressure and explode. Vapors
may accumulate in a confined space and create a flammable atmosphere.
Protection of Fire-Fighters:
Firefighters should wear self-contained, NIOSH-approved breathing apparatus for
protection against suffocation and possible toxic decomposition products. Proper eye and
skin protection should be provided. Use water spray to keep fire-exposed containers cool
and to knock down vapors which may result from product decomposition.
Section 6: Accidental Release Measures
Personal Precautions: Use personal protection recommended in Section 8.
Environmental Precautions: Take precautions to prevent contamination of ground and surface waters. Do not flush into
sewers or storm drains.
Methods for Containment & Clean-up: Dike area to contain spill. Ventilate the area with fresh air. If in confined space
or limited air circulation area, clean-up workers should wear appropriate
Product Name: 2-26® Multi-Purpose Precision Lubricant (aerosol)
Product Number (s): 02004, 02005, 02024, 72005
Page 3 of 7
respiratory protection. Recover or absorb spilled material using an absorbent
designed for chemical spills. Place used absorbents into proper waste
containers.
Section 7: Handling and Storage
Handling Procedures: Do not use near an open flame, heat, or other sources of ignition. Use caution around
energized equipment. The metal container will conduct electricity if it contacts a live source.
This may result in injury to the user from electrical shock and/or flash fire. For product use
instructions, please see the product label.
Storage Procedures: Store in a cool dry area out of direct sunlight. Aerosol cans must be maintained below 120 F to
prevent cans from rupturing.
Aerosol Storage Level: III
Section 8: Exposure Controls/Personal Protection
Exposure Guidelines:
OSHA ACGIH OTHER
COMPONENT TWA STEL TWA STEL TWA SOURCE UNIT
Isoparaffinic hydrocarbon NE NE NE NE 1200 mfr mg/m3
White mineral oil 5* NE 5* 10* NE mg/m3
Inhibitor blend NE NE NE NE NE
Carbon dioxide 5000 30,000 (v) 5000 30,000 NE ppm
N.E. – Not Established (c) – ceiling (s) – skin (v) – vacated * – oil mist
mfr – manufacturer’s recommendation
Controls and Protection:
Engineering Controls: Area should have ventilation to provide fresh air. Local exhaust ventilation is generally
preferred because it can control the emissions of the contaminant at the source, preventing
dispersion into the general work area. Use mechanical means if necessary to maintain vapor
levels below the exposure guidelines. If working in a confined space, follow applicable OSHA
regulations.
Respiratory Protection: None required for normal work where adequate ventilation is provided. If engineering controls
are not feasible or if exposure exceeds the applicable exposure limits, use a NIOSH-approved
cartridge respirator with organic vapor cartridge. Air monitoring is needed to determine actual
employee exposure levels. Use a self-contained breathing apparatus in confined spaces and
for emergencies.
Eye/face Protection: For normal conditions, wear safety glasses. Where there is reasonable probability of liquid
contact, wear splash-proof goggles.
Skin Protection: Use protective gloves such as nitrile or neoprene. Also, use full protective clothing if there is
prolonged or repeated contact of liquid with skin.
Section 9: Physical and Chemical Properties
Physical State: liquid
Color: amber
Odor: pleasant
Product Name: 2-26® Multi-Purpose Precision Lubricant (aerosol)
Product Number (s): 02004, 02005, 02024, 72005
Page 4 of 7
Odor Threshold: ND
Specific Gravity: 0.8127
Initial Boiling Point: 424°F
Freezing Point: ND
Vapor Pressure: < 0.1 mmHg @ 68°F
Vapor Density: > 1 (air = 1)
Evaporation Rate: slow
Solubility: negligible in water
Coefficient of water/oil distribution: ND
pH: NA
Volatile Organic Compounds: wt %: 0 g/L: 0 lbs./gal: 0
Section 10: Stability and Reactivity
Stability: Stable
Conditions to Avoid: Temperature extremes, sources of ignition
Incompatible Materials: Strong oxidizing agents
Hazardous Decomposition Products: Oxides of carbon
Possibility of Hazardous Reactions: No
Section 11: Toxicological Information
Long-term toxicological studies have not been conducted for this product. The following information is available for
components of this product.
Acute Toxicity:
Component Oral LD50 (rat) Dermal LD50 (rabbit) Inhalation LC50 (rat)
Isoparaffinic hydrocarbon > 5 g/kg > 2 g/kg > 5 mg/L/4H
White mineral oil > 5 g/kg > 2 g/kg No data
Inhibitor blend No data No data No data
Carbon dioxide No data No data 470,000 ppm/30M
Chronic Toxicity:
Component
OSHA
Carcinogen
IARC
Carcinogen
NTP
Carcinogen
Irritant
Sensitizer
Isoparaffinic hydrocarbon No No No S (mild) Unknown
White mineral oil No No No Unknown Unknown
Inhibitor blend No No No Unknown Unknown
Carbon dioxide No No No No No
Reproductive Toxicity: No information available
Teratogenicity: No information available
Mutagenicity: No information available
Synergistic Effects: No information available
Section 12: Ecological Information
Ecological studies have not been conducted for this product. The following information is available for components of this
E – Eye S – Skin R - Respiratory
Product Name: 2-26® Multi-Purpose Precision Lubricant (aerosol)
Product Number (s): 02004, 02005, 02024, 72005
Page 5 of 7
product.
Ecotoxicity: No information available
Persistence / Degradability: No information available
Bioaccumulation / Accumulation: No information available
Mobility in Environment: No information available
Section 13: Disposal Considerations
Waste Classification: The dispensed liquid product is not a RCRA hazardous waste. Pressurized containers are a
D003 reactive waste. (See 40 CFR Part 261.20 – 261.33)
Empty aerosol containers may be recycled.
All disposal activities must comply with federal, state, provincial and local regulations. Local regulations may be more
stringent than state, provincial or national requirements.
Section 14: Transport Information
US DOT (ground): Consumer Commodity, ORM-D
ICAO/IATA (air): Consumer Commodity, ID8000, 9
IMO/IMDG (water): Aerosols, UN1950, 2.1, Limited Quantity
Special Provisions: None
Section 15: Regulatory Information
U.S. Federal Regulations:
Toxic Substances Control Act (TSCA):
All ingredients are either listed on the TSCA inventory or are exempt.
Comprehensive Environmental Response, Compensation and Liability Act (CERCLA):
Reportable Quantities (RQ’s) exist for the following ingredients: None
Spills or releases resulting in the loss of any ingredient at or above its RQ require immediate notification to
the National Response Center (800-424-8802) and to your Local Emergency Planning Committee.
Superfund Amendments Reauthorization Act (SARA) Title III:
Section 302 Extremely Hazardous Substances (EHS): None
Section 311/312 Hazard Categories: Fire Hazard Yes
Reactive Hazard No
Release of Pressure Yes
Acute Health Hazard Yes
Chronic Health Hazard No
Section 313 Toxic Chemicals: This product contains the following substances subject to the reporting requirements
of Section 313 of Title III of the Superfund Amendments and Reauthorization Act of
1986 and 40 CFR Part 372:
None
Clean Air Act:
Section 112 Hazardous Air Pollutants (HAPs): None
Product Name: 2-26® Multi-Purpose Precision Lubricant (aerosol)
Product Number (s): 02004, 02005, 02024, 72005
Page 6 of 7
U.S. State Regulations:
California Safe Drinking Water and Toxic Enforcement Act (Prop 65):
This product may contain the following chemicals known to the state of
California to cause cancer, birth defects or other reproductive harm: None
Consumer Products VOC Regulations: In states with Consumer Products VOC regulations, this product is compliant as
a Multi-Purpose Lubricant.
State Right to Know:
New Jersey: None
Pennsylvania: None
Massachusetts: None
Rhode Island : None
Canadian Regulations:
Canadian DSL Inventory: All ingredients are either listed on the DSL Inventory or are exempt.
WHMIS Hazard Class: A, B5, D2B
European Union Regulations:
RoHS Compliance: This product is compliant with Directive 2002/95/EC of the European Parliament and of the
Council of 27 January 2003. This product does not contain any of the restricted substances as
listed in Article 4(1) of the RoHS Directive.
Additional Regulatory Information: None
Section 16: Other Information
HMIS® (II)
Health: 1
Flammability: 2
Reactivity: 0
PPE: B
Ratings range from 0 (no hazard) to 4 (severe hazard)
NFPA
Prepared By: Michelle Rudnick
CRC #: 591B
Revision Date: 08/05/2008
Changes since last revision: MSDS reformatted to meet the requirements of the Canadian Controlled Products
Regulations.
The information contained in this document applies to this specific material as supplied. It may not be valid for this
material if it is used in combination with any other materials. This information is accurate to the best of CRC Industries'
knowledge or obtained from sources believed by CRC to be accurate. Before using any product, read all warnings and
directions on the label. For further clarification of any information contained on this MSDS consult your supervisor, a
health & safety professional, or CRC Industries.
2
0
1
Product Name: 2-26® Multi-Purpose Precision Lubricant (aerosol)
Product Number (s): 02004, 02005, 02024, 72005
Page 7 of 7
ACGIH: American Conference of Governmental Industrial Hygienists
CAS: Chemical Abstract Service
CFR: Code of Federal Regulations
DOT: Department of Transportation
DSL: Domestic Substance List
g/L: grams per Liter
HMIS: Hazardous Materials Identification System
IARC: International Agency for Research on Cancer
IATA: International Air Transport Association
ICAO: International Civil Aviation Organization
IMDG: International Maritime Dangerous Goods
IMO: International Maritime Organization
lbs./gal: pounds per gallon
LC: Lethal Concentration
LD: Lethal Dose
NA: Not Applicable
ND: Not Determined
NIOSH: National Institute of Occupational Safety & Health
NFPA: National Fire Protection Association
NTP: National Toxicology Program
OSHA: Occupational Safety and Health Administration
PMCC: Pensky-Martens Closed Cup
PPE: Personal Protection Equipment
ppm: Parts per Million
RoHS: Restriction of Hazardous Substances
STEL: Short Term Exposure Limit
TCC: Tag Closed Cup
TWA: Time Weighted Average
WHMIS: Workplace Hazardous Materials Information
System